oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if70.0m-30a 70.0 mhz if saw filter 29.08 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if70.0m-30a january 2011 rev a 70.0 mhz if saw filter 29.08 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1 = 180nh, c1 = 2pf output l2 = 150nh source/load impedance 50 ?
oscilent part number 835-if70.0m-30a january 2011 rev a 70.0 mhz if saw filter 29.08 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 28.1 30.0 group delay variation (fo14.42mhz) nsec - 37 70 absolute delay at fo usec - 3.10 - passband ripple variation (fo14.42mhz) db - 0.65 - bandwidth at -1db mhz - 29.08 - bandwidth at -3db mhz - 29.27 - bandwidth at -40db mhz - 30.32 - relative attenuation @fo15.1mhz dbc - 27 - relative attenuation lower sidelobe db 50 52 - upper sidelobe db 50 52 - 52.0mhz~54.5mhz db - 47 - temperature coefficient ppm/c - -72 -
oscilent part number 835-if70.0m-30a january 2011 rev a 70.0 mhz if saw filter 29.08 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?40.0 db ripple variation (fo14.32mhz) group delay variation (fo14.32mhz)
oscilent part number 835-if70.0m-30a january 2011 rev a 70.0 mhz if saw filter 29.08 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation (fo14.42mhz) group delay variation (fo14.42mhz) relative attenuation
oscilent part number 835-if70.0m-30a january 2011 rev a 70.0 mhz if saw filter 29.08 mhz bandwidth product specification p. 5 www.oscilent.com smith chart
|